周峰.合金元素对Ti-46Al-8Nb合金充型性能的影响[J].稀有金属材料与工程,2019,48(9):2829~2834.[zhoufeng.Effects of Alloy Elements on the Mold Filling Capacity of Ti-46Al-8Nb Alloy[J].Rare Metal Materials and Engineering,2019,48(9):2829~2834.]
合金元素对Ti-46Al-8Nb合金充型性能的影响
投稿时间:2014-04-14??修订日期:2014-07-30
中文关键词:??合金元素??高Nb-TiAl??充型性能
基金项目:国家自然科学基金项目(面上项目,重点项目,重大项目)
中文摘要:
??????采用网状式样法制备包埋料型壳,对比研究了B、Y、Mn和Er等微合金元素对Ti-46Al-8Nb合金熔体铸造充型性能的影响。研究结果表明:添加微量元素B、Y、Mn、Er等均会对Ti-46Al-8Nb合金熔体铸造充型性能产生一定程度的改善作用。其中,0.5Y和1Mn改善作用十分明显,其加入使充填率分别增加了54.5%和48.5%。0.1Er、0.5B和1B对该合金充型性能的改善作用较为一般,其加入使充填率分别增加了3.0%、4.5%和5.3%。
Effects of Alloy Elements on the Mold Filling Capacity of Ti-46Al-8Nb Alloy
英文关键词:Micro-alloy elements??High Nb containing TiAl??Mold filling capacity
英文摘要:
??????Embedded material shell was prepared using wax grid with 8? mesh. The effects of micro-alloy elements B, Y, Mn and Er on the mold filling capacity of Ti-46Al-8Nb melt were studied. The results showed that the fluidity and mold filling property of Ti-46Al-8Nb melt was improved to some extent by B, Y, Mn and Er addition. Especially, 0.5Y and 1Mn addition had significant improvement on the mold filling capacity of the alloy, which increased the filling rate by 54.5% and 48.5% respectively. The effect of 0.1Er, 0.5B and 1B addition on the mold filling capacity of the alloy was not so remarkable, with the filling rate increasing by 3.0%, 4.5% and 5.3% respectively.
作者单位E-mail
周峰?北京工业大学?adamsonny@emails.bjut.edu.cn?
摘要点击次数:?67
全文下载次数:?15
查看全文??查看/发表评论??
关闭